PDMS Printing with BioAssemblyBot
Polydimethylsiloxane (PDMS) is a well-known and widely used viscoelastic biomaterial with applications across the tissue engineering.
top of page
News
News from the BioAssembly Community and Advanced Solutions.
Search
Advanced Solutions
Jan 12, 20213 min read
Printing Cells with BioBot Basic
In this article we examine printing a gelatin/alginate blend with incorporated cells using the BioBot Basic.
4980
Advanced Solutions
Dec 22, 20203 min read
Automated COVID-19 Antibody Testing Workflow
An automated ELISA-based protocol for detecting COVID-19 related antibodies with an automated workflow using BioAssemblyBot and BioApps.
1562
Advanced Solutions
Dec 9, 20203 min read
Generating a Continuous Gradient Through Extrusion-Based 3D Bioprinting
3D Syringe | Mix printhead gives users a unique ability to blend two materials for extrusion out of one syringe tip.
3422
Advanced Solutions
Dec 3, 20202 min read
Fabricating Cell-Based 3D Tissues with BioAssemblyBot
One of the major differentiating factors between other types of additive manufacturing and bioprinting is the incorporation of biocompatible
2191
Advanced Solutions
Nov 17, 20202 min read
Angiomics™ Microvessel Culture Using Matrigel
Advanced Solutions has been studying the use of Angiomics™ microvessels into Matrigel-based models and assays to improve the biology.
2791
Advanced Solutions
Nov 11, 20201 min read
Mechanical Properties of 3D Bioprinted Tissues - A Review by Advanced Solutions
Advanced Solutions explores how cell behavior, matrix composition, and tissue forces are critical in producing functional tissues
1761
Advanced Solutions
Nov 9, 20201 min read
Enabling Discovery and Innovation with 3D Biology & Beyond
You’re invited to an exclusive panel discussion this Thursday, November 12th!
1551
Advanced Solutions
Nov 5, 20201 min read
Advanced Solutions & Cytiva share Agile Biofabrication Workcell at AusBioPrint 2020
The 2nd Australian Bioprinting Workshop for Tissue Engineering and Regenerative Medicine was a great success. University of Technology...
2401
Advanced Solutions
Nov 4, 20202 min read
Michael Golway Named Alumni Fellow of the J.B. Speed School of Engineering
Advanced Solutions CEO Michael W. Golway has been named the 2020 Alumni Fellow of the J.B. Speed School of Engineering.
3222
Advanced Solutions
Oct 29, 20201 min read
VA Using BioAssemblyBot to Fight COVID-19
With COVID-19 cases continuing to rise across the nation, the U.S. Department of Veterans Affairs is putting their 3D printing network...
940
Advanced Solutions
Oct 26, 20202 min read
Advanced Solutions Discovers a Way to Guide New Blood Vessel Growth Across Tissue Boundaries
Advanced Solutions is pioneering the use of human-derived, isolated microvessel fragments in vasculatures in ex-vivo tissues and models.
2670
Advanced Solutions
Oct 22, 20202 min read
Dr. Jay Hoying to Speak at AM Medical Summit 2020
Dr. Jay Hoying, Chief Scientist of Advanced Solutions is speaking at the AM Medical Summit Powered by ASME during the virtual event.
1090
Advanced Solutions
Oct 15, 20202 min read
McGill researchers develop “triggered micropore-forming” 3D bioprinting approach with BioAssemblyBot
A recent article published in Materials Horizons by McGill University’s Bioengineering department demonstrates a novel bioprinting method.
6130
Advanced Solutions
Oct 13, 20201 min read
Dr. Beth Ripley, BioAssemblyBot user, Receives Service to America Medal
Advanced Solutions would like to congratulate Dr. Beth Ripley on receiving the Science and Environmental Medal.
850
Advanced Solutions
Sep 11, 20202 min read
French Defense Innovation Agency Uses BioAssemblyBot® for In-Vivo 3D Bioprinting
For healthcare professionals treating trauma patients injured by explosions and burns, there can be significant clinical challenges....
4800
Advanced Solutions
Sep 10, 20202 min read
UTEP Explores 3D Bioprinting Scalability: BioAssemblyBot® vs. Cellink’s BioX™
UTEP found that prints from BAB had higher resolution, ultrastructural details, and improved crosslinking in comparison to prints from BioX.
4870
Advanced Solutions
Aug 20, 20201 min read
Aniwaa features BioAssemblyBot in Buyer's Guide
Aniwaa features BioAssemblyBot in 3D Bioprinter Buyer's Guide
801
Advanced Solutions
Jul 10, 20201 min read
The Segway's Inventor Has a New Project: Manufacturing Human Organs
In this article, Liz Brody writes about Dean Kamen, the inventor of the Segway, and how his new venture into human organ manufacturing.
1524
Advanced Solutions
Jul 8, 20201 min read
BioAssemblyBot used in Cardiovascular Research
Dr. Serpooshan said “[BioAssemblyBot] is a six-axis robotic arm printer, one of the most sophisticated on the market"
1141
bottom of page